Magnetic Luminex Assay Kit for Heparanase (HPSE)

HPA; HPR1; HPSE1; HSE1; Endo-glucoronidase;

  • Magnetic Luminex Assay Kit for Heparanase (HPSE) Packages (Simulation)
  • Magnetic Luminex Assay Kit for Heparanase (HPSE) Packages (Simulation)
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

This assay has high sensitivity and excellent specificity for detection of Heparanase (HPSE).
No significant cross-reactivity or interference between Heparanase (HPSE) and analogues was observed.

Recovery of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

Matrices listed below were spiked with certain level of recombinant Heparanase (HPSE) and the recovery rates were calculated by comparing the measured value to the expected amount of Heparanase (HPSE) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 89-103 97
EDTA plasma(n=5) 87-96 91
heparin plasma(n=5) 81-93 86
sodium citrate plasma(n=5) 81-88 85

Precision of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Heparanase (HPSE) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Heparanase (HPSE) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Heparanase (HPSE) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 82-104% 96-105% 95-105% 82-96%
EDTA plasma(n=5) 82-103% 87-101% 91-98% 87-101%
heparin plasma(n=5) 87-98% 86-93% 98-105% 98-105%
sodium citrate plasma(n=5) 79-89% 78-96% 85-93% 84-92%

Stability of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

1. Preparation of standards, reagents and samples before the experiment;
2. Add 100μL standard or sample to each well,
    add 10μL magnetic beads, and incubate 90min at 37°C on shaker;
3. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60min at 37°C on shaker;
4. Wash plate on magnetic frame for three times;
5. Add 100μL prepared Detection Reagent B, and incubate 30 min at 37°C on shaker;
6. Wash plate on magnetic frame for three times;
7. Add 100μL sheath solution, swirl for 2 minutes, read on the machine.

Test principle of the Magnetic Luminex Assay Kit for Heparanase (HPSE)

Analyte-specific antibodies are pre-coated onto color-coded microparticles. Microparticles, standards, and samples are pipetted into wells and the immobilized antibodies bind the analytes of interest. After washing away any unbound substances, a biotinylated antibody cocktail specific to the analytes of interest is added to each well. Following a wash to remove any unbound biotinylated antibody, Streptavidin-Phycoerythrin conjugate (Streptavidin-PE), which binds to the biotinylated detection antibodies, is added to each well. A final wash removes unbound Streptavidin-PE and the microparticles are resuspended in buffer and read using the Luminex or Bio-Plex analyzer.The MFI developed is proportional to the concentration of analytes of interest in the sample.

GIVEAWAYS

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPA711Hu04 Recombinant Heparanase (HPSE) Positive Control; Immunogen; SDS-PAGE; WB.
RPA711Hu02 Recombinant Heparanase (HPSE) Positive Control; Immunogen; SDS-PAGE; WB.
APA711Hu01 Active Heparanase (HPSE) Cell culture; Activity Assays.
RPA711Hu01 Recombinant Heparanase (HPSE) Positive Control; Immunogen; SDS-PAGE; WB.
RPA711Hu03 Recombinant Heparanase (HPSE) Positive Control; Immunogen; SDS-PAGE; WB.
CPA711Hu21 OVA Conjugated Heparanase (HPSE) Immunogen; SDS-PAGE; WB.
PAA711Hu04 Polyclonal Antibody to Heparanase (HPSE) WB; IHC; ICC; IP.
PAA711Hu02 Polyclonal Antibody to Heparanase (HPSE) WB; IHC; ICC; IP.
PAA711Hu01 Polyclonal Antibody to Heparanase (HPSE) WB; IHC; ICC; IP.
PAA711Hu03 Polyclonal Antibody to Heparanase (HPSE) WB; IHC; ICC; IP.
FAA711Hu01 Anti-Heparanase (HPSE) Polyclonal Antibody Flow cytometry.
LAA711Hu71 Biotin-Linked Polyclonal Antibody to Heparanase (HPSE) WB; IHC; ICC.
MAA711Hu22 Monoclonal Antibody to Heparanase (HPSE) WB; IHC; ICC; IP.
MAA711Hu21 Monoclonal Antibody to Heparanase (HPSE) WB; IHC; ICC; IP.
SEA711Hu ELISA Kit for Heparanase (HPSE) Enzyme-linked immunosorbent assay for Antigen Detection.
HEA711Hu High Sensitive ELISA Kit for Heparanase (HPSE) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA711Hu Magnetic Luminex Assay Kit for Heparanase (HPSE) Magnetic Luminex Assay for Antigen Detection.
KSA711Hu01 ELISA Kit DIY Materials for Heparanase (HPSE) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK