Instant ELISA Kit for Testosterone (Testo)

T; Testesteron; Testeronun

  • Instant ELISA Kit for Testosterone (Testo) Packages (Simulation)
  • Instant ELISA Kit for Testosterone (Testo) Packages (Simulation)
  • Instant ELISA Kit for Testosterone (Testo) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the Instant ELISA Kit for Testosterone (Testo)

This assay has high sensitivity and excellent specificity for detection of Instant Testosterone (Testo).
No significant cross-reactivity or interference between Instant Testosterone (Testo) and analogues was observed.

Recovery of the Instant ELISA Kit for Testosterone (Testo)

Matrices listed below were spiked with certain level of Instant Testosterone (Testo) and the recovery rates were calculated by comparing the measured value to the expected amount of Instant Testosterone (Testo) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 94-101 98
EDTA plasma(n=5) 84-93 89
heparin plasma(n=5) 87-94 91

Precision of the Instant ELISA Kit for Testosterone (Testo)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Instant Testosterone (Testo) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Instant Testosterone (Testo) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the Instant ELISA Kit for Testosterone (Testo)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Instant Testosterone (Testo) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 98-105% 97-105% 78-101% 78-89%
EDTA plasma(n=5) 88-95% 93-102% 97-105% 88-98%
heparin plasma(n=5) 82-94% 78-102% 95-104% 81-90%

Stability of the Instant ELISA Kit for Testosterone (Testo)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the Instant ELISA Kit for Testosterone (Testo)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 30 minutes at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 30 minutes at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 10 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the Instant ELISA Kit for Testosterone (Testo)

The test principle applied in this kit is enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Instant Testosterone (Testo). Standards or samples and HRP-labeled detection antibody specific to Instant Testosterone (Testo) (Detection Reagent A) are then added to the appropriate microtiter plate wells. Next, TMB substrate solution is added, only those wells that contain Instant Testosterone (Testo), and HRP-labeled detection antibody will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Instant Testosterone (Testo) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Pan-species (General) Applications (RESEARCH USE ONLY!)
CPA458Ge11 BSA Conjugated Testosterone (Testo) Immunogen; SDS-PAGE; WB.
CPA458Ge21 OVA Conjugated Testosterone (Testo) Immunogen; SDS-PAGE; WB.
PAA458Ge01 Polyclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
PAA458Ge02 Polyclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
LAA458Ge71 Biotin-Linked Polyclonal Antibody to Testosterone (Testo) WB; IHC; ICC.
MAA458Ge27 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge22 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge23 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge24 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge25 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge21 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MEA458Ge Mini Samples ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
IEA458Ge Instant ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
HEA458Ge High Sensitive ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
CEA458Ge ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
CCA458Ge CLIA Kit for Testosterone (Testo) Chemiluminescent immunoassay for Antigen Detection.
LMA458Ge Multiplex Assay Kit for Testosterone (Testo) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA458Ge11 ELISA Kit DIY Materials for Testosterone (Testo) Main materials for "Do It (ELISA Kit) Yourself".
KSA458Ge12 ELISA Kit DIY Materials for Testosterone (Testo) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK