Instant ELISA Kit for Integrin Beta 1 (ITGb1)
CD29; MSK12; ITG-B1; FNRB; GPIIA; MDF2; MSK12; VLAB; Fibronectin Receptor Beta Polypeptide; Antigen CD29 Includes MDF2; Glycoprotein IIa; VLA-4 subunit beta
- Product No.IEB042Hu
- Organism SpeciesHomo sapiens (Human) Same name, Different species.
- Test MethodDouble-antibody Sandwich
- Assay Length1h, 10min
- Detection Range0.78-50ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.31ng/mL.
- Sample TypeTissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Download Instruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
-
FOB
US$ 505
For more details, please contact local distributors!US$ 722
For more details, please contact local distributors! US$ 3249
For more details, please contact local distributors! US$ 6137
For more details, please contact local distributors! US$ 50540
For more details, please contact local distributors!
-
Packages (Simulation)
-
Packages (Simulation)
-
Results demonstration
-
Typical Standard Curve
-
ISO9001: 2008, ISO13485: 2003 Registered
Specificity of the Instant ELISA Kit for Integrin Beta 1 (ITGb1)
This assay has high sensitivity and excellent specificity for detection of Instant Integrin Beta 1 (ITGb1).
No significant cross-reactivity or interference between Instant Integrin Beta 1 (ITGb1) and analogues was observed.
Precision of the Instant ELISA Kit for Integrin Beta 1 (ITGb1)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Instant Integrin Beta 1 (ITGb1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Instant Integrin Beta 1 (ITGb1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Stability of the Instant ELISA Kit for Integrin Beta 1 (ITGb1)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the Instant ELISA Kit for Integrin Beta 1 (ITGb1)
1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 30 minutes at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 30 minutes at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 10 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.
Test principle of the Instant ELISA Kit for Integrin Beta 1 (ITGb1)
The test principle applied in this kit is enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Instant Integrin Beta 1 (ITGb1). Standards or samples and HRP-labeled detection antibody specific to Instant Integrin Beta 1 (ITGb1) (Detection Reagent A) are then added to the appropriate microtiter plate wells. Next, TMB substrate solution is added, only those wells that contain Instant Integrin Beta 1 (ITGb1), and HRP-labeled detection antibody will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Instant Integrin Beta 1 (ITGb1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
GIVEAWAYS
INCREMENT SERVICES
Related products
| Catalog No. | Organism species: Homo sapiens (Human) | Applications (RESEARCH USE ONLY!) |
| RPB042Hu02 | Recombinant Integrin Beta 1 (ITGb1) | Positive Control; Immunogen; SDS-PAGE; WB. |
| RPB042Hu01 | Recombinant Integrin Beta 1 (ITGb1) | Positive Control; Immunogen; SDS-PAGE; WB. |
| PAB042Hu01 | Polyclonal Antibody to Integrin Beta 1 (ITGb1) | WB; IHC; ICC; IP. |
| PAB042Hu02 | Polyclonal Antibody to Integrin Beta 1 (ITGb1) | WB; IHC; ICC; IP. |
| LAB042Hu71 | Biotin-Linked Polyclonal Antibody to Integrin Beta 1 (ITGb1) | WB; IHC; ICC. |
| MAB042Hu22 | Monoclonal Antibody to Integrin Beta 1 (ITGb1) | WB; IHC; ICC; IP. |
| MAB042Hu21 | Monoclonal Antibody to Integrin Beta 1 (ITGb1) | WB; IHC; ICC; IP. |
| SEB042Hu | ELISA Kit for Integrin Beta 1 (ITGb1) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| IEB042Hu | Instant ELISA Kit for Integrin Beta 1 (ITGb1) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| LMB042Hu | Multiplex Assay Kit for Integrin Beta 1 (ITGb1) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |
| KSB042Hu01 | ELISA Kit DIY Materials for Integrin Beta 1 (ITGb1) | Main materials for "Do It (ELISA Kit) Yourself". |