High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

IL1-B; IL1-Beta; IL1F2; IL-1β; Interleukin-1 Family Member 2; Catabolin

  • High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b) Packages (Simulation)
  • High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b) Packages (Simulation)
  • High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b) Results demonstration
  • HEA563Po.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Interleukin 1 Beta (IL1b).
No significant cross-reactivity or interference between High Sensitive Interleukin 1 Beta (IL1b) and analogues was observed.

Recovery of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

Matrices listed below were spiked with certain level of recombinant High Sensitive Interleukin 1 Beta (IL1b) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Interleukin 1 Beta (IL1b) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 78-92 83
EDTA plasma(n=5) 88-101 94
heparin plasma(n=5) 81-88 85

Precision of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Interleukin 1 Beta (IL1b) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Interleukin 1 Beta (IL1b) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Interleukin 1 Beta (IL1b) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 87-104% 78-103% 91-101% 99-105%
EDTA plasma(n=5) 90-101% 88-96% 94-102% 93-101%
heparin plasma(n=5) 90-99% 79-93% 91-103% 89-99%

Stability of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Interleukin 1 Beta (IL1b). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Interleukin 1 Beta (IL1b). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Interleukin 1 Beta (IL1b), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Interleukin 1 Beta (IL1b) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Sus scrofa; Porcine (Pig) Applications (RESEARCH USE ONLY!)
RPA563Po01 Recombinant Interleukin 1 Beta (IL1b) Positive Control; Immunogen; SDS-PAGE; WB.
APA563Po01 Active Interleukin 1 Beta (IL1b) Cell culture; Activity Assays.
PAA563Po01 Polyclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC; IP.
MAA563Po24 Monoclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC; IP.
MAA563Po22 Monoclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC; IP.
MAA563Po26 Monoclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC; IP.
MAA563Po23 Monoclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC; IP.
MAA563Po21 Monoclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC; IP.
LAA563Po76 Biotin-Linked Monoclonal Antibody to Interleukin 1 Beta (IL1b) WB; IHC; ICC.
HEA563Po High Sensitive ELISA Kit for Interleukin 1 Beta (IL1b) Enzyme-linked immunosorbent assay for Antigen Detection.
SEA563Po ELISA Kit for Interleukin 1 Beta (IL1b) Enzyme-linked immunosorbent assay for Antigen Detection.
LMA563Po Multiplex Assay Kit for Interleukin 1 Beta (IL1b) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSA563Po01 Antibody Pair for Interleukin 1 Beta (IL1b) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSA563Po01 ELISA Kit DIY Materials for Interleukin 1 Beta (IL1b) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK