High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

Apo-B48

  • High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48) Packages (Simulation)
  • High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48) Packages (Simulation)
  • High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48) Results demonstration
  • HEB883Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Apolipoprotein B48 (APOB48).
No significant cross-reactivity or interference between High Sensitive Apolipoprotein B48 (APOB48) and analogues was observed.

Recovery of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

Matrices listed below were spiked with certain level of recombinant High Sensitive Apolipoprotein B48 (APOB48) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Apolipoprotein B48 (APOB48) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 82-91 88
EDTA plasma(n=5) 86-101 95
heparin plasma(n=5) 98-105 102

Precision of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Apolipoprotein B48 (APOB48) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Apolipoprotein B48 (APOB48) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Apolipoprotein B48 (APOB48) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 98-105% 83-90% 87-94% 78-89%
EDTA plasma(n=5) 79-94% 82-101% 94-104% 85-104%
heparin plasma(n=5) 79-93% 92-99% 98-105% 94-102%

Stability of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Apolipoprotein B48 (APOB48). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Apolipoprotein B48 (APOB48). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Apolipoprotein B48 (APOB48), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Apolipoprotein B48 (APOB48) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPB883Hu01 Recombinant Apolipoprotein B48 (APOB48) Positive Control; Immunogen; SDS-PAGE; WB.
RPB883Hu02 Recombinant Apolipoprotein B48 (APOB48) Positive Control; Immunogen; SDS-PAGE; WB.
PAB883Hu01 Polyclonal Antibody to Apolipoprotein B48 (APOB48) WB; IHC; ICC; IP.
MAB883Hu21 Monoclonal Antibody to Apolipoprotein B48 (APOB48) WB; IHC; ICC; IP.
SEB883Hu ELISA Kit for Apolipoprotein B48 (APOB48) Enzyme-linked immunosorbent assay for Antigen Detection.
HEB883Hu High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB883Hu CLIA Kit for Apolipoprotein B48 (APOB48) Chemiluminescent immunoassay for Antigen Detection.
LMB883Hu Multiplex Assay Kit for Apolipoprotein B48 (APOB48) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK