ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1)

NTR; NTRH; NTRR; High-affinity levocabastine-insensitive neurotensin receptor

  • ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1) Packages (Simulation)
  • ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1) Packages (Simulation)
  • ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1) Results demonstration
  • SEC826Mu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1)

This assay has high sensitivity and excellent specificity for detection of Neurotensin Receptor 1, High Affinity (NTSR1).
No significant cross-reactivity or interference between Neurotensin Receptor 1, High Affinity (NTSR1) and analogues was observed.

Precision of the ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Neurotensin Receptor 1, High Affinity (NTSR1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Neurotensin Receptor 1, High Affinity (NTSR1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Neurotensin Receptor 1, High Affinity (NTSR1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Neurotensin Receptor 1, High Affinity (NTSR1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Neurotensin Receptor 1, High Affinity (NTSR1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Neurotensin Receptor 1, High Affinity (NTSR1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPC826Mu01 Recombinant Neurotensin Receptor 1, High Affinity (NTSR1) Positive Control; Immunogen; SDS-PAGE; WB.
RPC826Mu02 Recombinant Neurotensin Receptor 1, High Affinity (NTSR1) Positive Control; Immunogen; SDS-PAGE; WB.
PAC826Mu01 Polyclonal Antibody to Neurotensin Receptor 1, High Affinity (NTSR1) WB; IHC; ICC; IP.
PAC826Mu02 Polyclonal Antibody to Neurotensin Receptor 1, High Affinity (NTSR1) WB; IHC; ICC; IP.
SEC826Mu ELISA Kit for Neurotensin Receptor 1, High Affinity (NTSR1) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC826Mu Multiplex Assay Kit for Neurotensin Receptor 1, High Affinity (NTSR1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK