ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS)

LKR/SDH; LKRSDH; LORSDH; Saccharopine dehydrogenase; Alpha-Aminoadipic Semialdehyde Synthase,Mitochondrial; Lysine ketoglutarate reductase

  • ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS) Packages (Simulation)
  • ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS) Packages (Simulation)
  • ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS) Results demonstration
  • SEC855Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS)

This assay has high sensitivity and excellent specificity for detection of Aminoadipate Semialdehyde Synthase (AASS).
No significant cross-reactivity or interference between Aminoadipate Semialdehyde Synthase (AASS) and analogues was observed.

Precision of the ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Aminoadipate Semialdehyde Synthase (AASS) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Aminoadipate Semialdehyde Synthase (AASS) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Aminoadipate Semialdehyde Synthase (AASS). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Aminoadipate Semialdehyde Synthase (AASS). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Aminoadipate Semialdehyde Synthase (AASS), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Aminoadipate Semialdehyde Synthase (AASS) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPC855Hu01 Recombinant Aminoadipate Semialdehyde Synthase (AASS) Positive Control; Immunogen; SDS-PAGE; WB.
PAC855Hu01 Polyclonal Antibody to Aminoadipate Semialdehyde Synthase (AASS) WB; IHC
SEC855Hu ELISA Kit for Aminoadipate Semialdehyde Synthase (AASS) Enzyme-linked immunosorbent assay for Antigen Detection.
GUESTBOOK