CLIA Kit for Laminin (LN)
LAM
- Product No.SCA082Hu
- Organism SpeciesHomo sapiens (Human) Same name, Different species.
- Test MethodDouble-antibody Sandwich
- Assay Length2h, 40min
- Detection Range6.9-5,000pg/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 2.8pg/mL.
- Sample TypeSerum, plasma and other biological fluids
- Download Instruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
-
FOB
US$ 588
For more details, please contact local distributors!US$ 840
For more details, please contact local distributors! US$ 3780
For more details, please contact local distributors! US$ 7140
For more details, please contact local distributors! US$ 58800
For more details, please contact local distributors!
-
Packages (Simulation)
-
Packages (Simulation)
-
Results demonstration
-
ISO9001: 2008, ISO13485: 2003 Registered
Specificity of the CLIA Kit for Laminin (LN)
This assay has high sensitivity and excellent specificity for detection of Laminin (LN).
No significant cross-reactivity or interference between Laminin (LN) and analogues was observed.
Recovery of the CLIA Kit for Laminin (LN)
Matrices listed below were spiked with certain level of recombinant Laminin (LN) and the recovery rates were calculated by comparing the measured value to the expected amount of Laminin (LN) in samples.
| Matrix | Recovery range (%) | Average(%) |
| serum(n=5) | 85-101 | 90 |
| EDTA plasma(n=5) | 79-93 | 89 |
| heparin plasma(n=5) | 86-99 | 95 |
Precision of the CLIA Kit for Laminin (LN)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Laminin (LN) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Laminin (LN) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Linearity of the CLIA Kit for Laminin (LN)
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Laminin (LN) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
| Sample | 1:2 | 1:4 | 1:8 | 1:16 |
| serum(n=5) | 88-97% | 97-105% | 83-95% | 86-95% |
| EDTA plasma(n=5) | 95-102% | 83-96% | 84-93% | 85-101% |
| heparin plasma(n=5) | 98-105% | 83-101% | 84-101% | 98-105% |
Stability of the CLIA Kit for Laminin (LN)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the CLIA Kit for Laminin (LN)
1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.
Test principle of the CLIA Kit for Laminin (LN)
The microplate provided in this kit has been pre-coated with an antibody specific to Laminin (LN). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Laminin (LN). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Laminin (LN) level in the sample or standard.;
GIVEAWAYS
INCREMENT SERVICES
Related products
| Catalog No. | Organism species: Homo sapiens (Human) | Applications (RESEARCH USE ONLY!) |
| NPA082Hu01 | Native Laminin (LN) | Positive Control; Immunogen; SDS-PAGE; WB. |
| PAA082Hu01 | Polyclonal Antibody to Laminin (LN) | WB; IHC; ICC; IP. |
| LAA082Hu71 | Biotin-Linked Polyclonal Antibody to Laminin (LN) | WB; IHC; ICC. |
| HEA082Hu | High Sensitive ELISA Kit for Laminin (LN) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| SEA082Hu | ELISA Kit for Laminin (LN) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| SCA082Hu | CLIA Kit for Laminin (LN) | Chemiluminescent immunoassay for Antigen Detection. |
| LMA082Hu | Multiplex Assay Kit for Laminin (LN) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |
| KSA082Hu01 | ELISA Kit DIY Materials for Laminin (LN) | Main materials for "Do It (ELISA Kit) Yourself". |