CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

CD54; BB2; P3.58; Human Rhinovirus Receptor; Major group rhinovirus receptor

  • CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1) Packages (Simulation)
  • CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1) Packages (Simulation)
  • CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1) Results demonstration
  • SCA548Ra.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

This assay has high sensitivity and excellent specificity for detection of Intercellular Adhesion Molecule 1 (ICAM1).
No significant cross-reactivity or interference between Intercellular Adhesion Molecule 1 (ICAM1) and analogues was observed.

Recovery of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

Matrices listed below were spiked with certain level of recombinant Intercellular Adhesion Molecule 1 (ICAM1) and the recovery rates were calculated by comparing the measured value to the expected amount of Intercellular Adhesion Molecule 1 (ICAM1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 85-99 95
EDTA plasma(n=5) 98-105 101
heparin plasma(n=5) 88-96 93

Precision of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Intercellular Adhesion Molecule 1 (ICAM1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Intercellular Adhesion Molecule 1 (ICAM1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Intercellular Adhesion Molecule 1 (ICAM1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-101% 87-101% 82-98% 97-104%
EDTA plasma(n=5) 82-91% 98-105% 92-99% 87-101%
heparin plasma(n=5) 79-88% 95-103% 98-105% 80-96%

Stability of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1)

The microplate provided in this kit has been pre-coated with an antibody specific to Intercellular Adhesion Molecule 1 (ICAM1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Intercellular Adhesion Molecule 1 (ICAM1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Intercellular Adhesion Molecule 1 (ICAM1) level in the sample or standard.;

Related products

Catalog No. Organism species: Rattus norvegicus (Rat) Applications (RESEARCH USE ONLY!)
UEPA548Ra61 Eukaryotic Intercellular Adhesion Molecule 1 (ICAM1) Positive Control; Immunogen; SDS-PAGE; WB.
URPA548Ra01 Recombinant Intercellular Adhesion Molecule 1 (ICAM1) Positive Control; Immunogen; SDS-PAGE; WB.
UPAA548Ra01 Polyclonal Antibody to Intercellular Adhesion Molecule 1 (ICAM1) WB; IHC; ICC/IF
UMAA548Ra21 Monoclonal Antibody to Intercellular Adhesion Molecule 1 (ICAM1) WB; IHC; ICC; IP.
USEA548Ra ELISA Kit for Intercellular Adhesion Molecule 1 (ICAM1) Enzyme-linked immunosorbent assay for Antigen Detection.
USCA548Ra CLIA Kit for Intercellular Adhesion Molecule 1 (ICAM1) Chemiluminescent immunoassay for Antigen Detection.
ULMA548Ra Multiplex Assay Kit for Intercellular Adhesion Molecule 1 (ICAM1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK