CLIA Kit for Immunoglobulin A (IgA)

  • CLIA Kit for Immunoglobulin A (IgA) Packages (Simulation)
  • CLIA Kit for Immunoglobulin A (IgA) Packages (Simulation)
  • CLIA Kit for Immunoglobulin A (IgA) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Immunoglobulin A (IgA)

This assay has high sensitivity and excellent specificity for detection of Immunoglobulin A (IgA).
No significant cross-reactivity or interference between Immunoglobulin A (IgA) and analogues was observed.

Precision of the CLIA Kit for Immunoglobulin A (IgA)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Immunoglobulin A (IgA) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Immunoglobulin A (IgA) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the CLIA Kit for Immunoglobulin A (IgA)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Immunoglobulin A (IgA)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Immunoglobulin A (IgA)

The microplate provided in this kit has been pre-coated with an antibody specific to Immunoglobulin A (IgA). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Immunoglobulin A (IgA). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Immunoglobulin A (IgA) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
NPA546Hu01 Native Immunoglobulin A (IgA) Positive Control; Immunogen; SDS-PAGE; WB.
PAA546Hu05 Polyclonal Antibody to Immunoglobulin A (IgA) WB; IHC; ICC; IP.
PAA546Hu01 Polyclonal Antibody to Immunoglobulin A (IgA) WB; IHC; ICC; IP.
SAA546Hu09 HRP-Linked Rabbit Anti-Human IgA Polyclonal Antibody ELISA; WB; IHC; ICC.
LAA546Hu71 Biotin-Linked Polyclonal Antibody to Immunoglobulin A (IgA) WB; IHC; ICC.
SEA546Hu ELISA Kit for Immunoglobulin A (IgA) Enzyme-linked immunosorbent assay for Antigen Detection.
MEA546Hu Mini Samples ELISA Kit for Immunoglobulin A (IgA) Enzyme-linked immunosorbent assay for Antigen Detection.
AEA546Hu ELISA Kit for Anti-Immunoglobulin A Antibody (Anti-IgA) Enzyme-linked immunosorbent assay for Antibody Detection.
SCA546Hu CLIA Kit for Immunoglobulin A (IgA) Chemiluminescent immunoassay for Antigen Detection.
LMA546Hu Multiplex Assay Kit for Immunoglobulin A (IgA) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA546Hu01 ELISA Kit DIY Materials for Immunoglobulin A (IgA) Main materials for "Do It(ELISA Kit) Yourself"
GUESTBOOK