CLIA Kit for Cholecystokinin A Receptor (CCKAR)

CCK-A; CCK1; CCKRA; CCK1R; Cholecystokinin Type 1 Receptor

  • CLIA Kit for Cholecystokinin A Receptor (CCKAR) Packages (Simulation)
  • CLIA Kit for Cholecystokinin A Receptor (CCKAR) Packages (Simulation)
  • CLIA Kit for Cholecystokinin A Receptor (CCKAR) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Cholecystokinin A Receptor (CCKAR)

This assay has high sensitivity and excellent specificity for detection of Cholecystokinin A Receptor (CCKAR).
No significant cross-reactivity or interference between Cholecystokinin A Receptor (CCKAR) and analogues was observed.

Precision of the CLIA Kit for Cholecystokinin A Receptor (CCKAR)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Cholecystokinin A Receptor (CCKAR) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Cholecystokinin A Receptor (CCKAR) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the CLIA Kit for Cholecystokinin A Receptor (CCKAR)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Cholecystokinin A Receptor (CCKAR)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Cholecystokinin A Receptor (CCKAR)

The microplate provided in this kit has been pre-coated with an antibody specific to Cholecystokinin A Receptor (CCKAR). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Cholecystokinin A Receptor (CCKAR). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Cholecystokinin A Receptor (CCKAR) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPA104Hu01 Recombinant Cholecystokinin A Receptor (CCKAR) Positive Control; Immunogen; SDS-PAGE; WB.
CPA104Hu21 OVA Conjugated Cholecystokinin A Receptor (CCKAR) Immunogen; SDS-PAGE; WB.
PAA104Hu01 Polyclonal Antibody to Cholecystokinin A Receptor (CCKAR) WB; IHC; ICC; IP.
MAA104Hu22 Monoclonal Antibody to Cholecystokinin A Receptor (CCKAR) WB; IHC; ICC; IP.
SEA104Hu ELISA Kit for Cholecystokinin A Receptor (CCKAR) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA104Hu CLIA Kit for Cholecystokinin A Receptor (CCKAR) Chemiluminescent immunoassay for Antigen Detection.
LMA104Hu Multiplex Assay Kit for Cholecystokinin A Receptor (CCKAR) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK