Mini Samples ELISA Kit for Testosterone (Testo)

T; Testesteron; Testeronun

  • Mini Samples ELISA Kit for Testosterone (Testo) Packages (Simulation)
  • Mini Samples ELISA Kit for Testosterone (Testo) Packages (Simulation)
  • Mini Samples ELISA Kit for Testosterone (Testo) Results demonstration
  • MEA458Ge.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the Mini Samples ELISA Kit for Testosterone (Testo)

This assay has high sensitivity and excellent specificity for detection of Mini Samples Testosterone (Testo).
No significant cross-reactivity or interference between Mini Samples Testosterone (Testo) and analogues was observed.

Recovery of the Mini Samples ELISA Kit for Testosterone (Testo)

Matrices listed below were spiked with certain level of Mini Samples Testosterone (Testo) and the recovery rates were calculated by comparing the measured value to the expected amount of Mini Samples Testosterone (Testo) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 78-104 99
EDTA plasma(n=5) 92-101 95
heparin plasma(n=5) 89-99 95

Precision of the Mini Samples ELISA Kit for Testosterone (Testo)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Testosterone (Testo) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Testosterone (Testo) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the Mini Samples ELISA Kit for Testosterone (Testo)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mini Samples Testosterone (Testo) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 80-101% 80-102% 83-101% 91-98%
EDTA plasma(n=5) 85-92% 85-94% 86-97% 95-104%
heparin plasma(n=5) 88-95% 90-98% 78-88% 83-102%

Stability of the Mini Samples ELISA Kit for Testosterone (Testo)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the Mini Samples ELISA Kit for Testosterone (Testo)

1. Prepare all reagents, samples and standards;
2. Add 25µL standard or sample to each well.
    And then add 25μL prepared Detection Reagent A immediately.
    Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 50µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 50µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 25µL Stop Solution. Read at 450 nm immediately.

Test principle of the Mini Samples ELISA Kit for Testosterone (Testo)

This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Mini Samples Testosterone (Testo) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Mini Samples Testosterone (Testo) and unlabeled Mini Samples Testosterone (Testo) (Standards or samples) with the pre-coated antibody specific to Mini Samples Testosterone (Testo). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Mini Samples Testosterone (Testo) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Mini Samples Testosterone (Testo) in the sample.

Related products

Catalog No. Organism species: Pan-species (General) Applications (RESEARCH USE ONLY!)
CPA458Ge11 BSA Conjugated Testosterone (Testo) Immunogen; SDS-PAGE; WB.
CPA458Ge21 OVA Conjugated Testosterone (Testo) Immunogen; SDS-PAGE; WB.
PAA458Ge01 Polyclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
PAA458Ge02 Polyclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
LAA458Ge71 Biotin-Linked Polyclonal Antibody to Testosterone (Testo) WB; IHC; ICC.
MAA458Ge27 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge22 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge23 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge24 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge25 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAA458Ge21 Monoclonal Antibody to Testosterone (Testo) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MEA458Ge Mini Samples ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
IEA458Ge Instant ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
HEA458Ge High Sensitive ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
CEA458Ge ELISA Kit for Testosterone (Testo) Enzyme-linked immunosorbent assay for Antigen Detection.
CCA458Ge CLIA Kit for Testosterone (Testo) Chemiluminescent immunoassay for Antigen Detection.
LMA458Ge Multiplex Assay Kit for Testosterone (Testo) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSA458Ge11 ELISA Kit DIY Materials for Testosterone (Testo) Main materials for "Do It (ELISA Kit) Yourself".
KSA458Ge12 ELISA Kit DIY Materials for Testosterone (Testo) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK