High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

LOS; Lipoglycans; Lipooligosaccharide; Lipo-Oligosaccharide; Endotoxin

  • High Sensitive ELISA Kit for Lipopolysaccharide (LPS) Packages (Simulation)
  • High Sensitive ELISA Kit for Lipopolysaccharide (LPS) Packages (Simulation)
  • High Sensitive ELISA Kit for Lipopolysaccharide (LPS) Results demonstration
  • HEB526Ge.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Lipopolysaccharide (LPS).
No significant cross-reactivity or interference between High Sensitive Lipopolysaccharide (LPS) and analogues was observed.

Recovery of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

Matrices listed below were spiked with certain level of recombinant High Sensitive Lipopolysaccharide (LPS) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Lipopolysaccharide (LPS) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 82-104 89
EDTA plasma(n=5) 89-96 93
heparin plasma(n=5) 78-101 94

Precision of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Lipopolysaccharide (LPS) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Lipopolysaccharide (LPS) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Lipopolysaccharide (LPS) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 87-98% 95-105% 93-102% 85-103%
EDTA plasma(n=5) 78-104% 78-103% 99-105% 88-96%
heparin plasma(n=5) 86-104% 78-92% 93-101% 78-97%

Stability of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Lipopolysaccharide (LPS)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Lipopolysaccharide (LPS). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Lipopolysaccharide (LPS). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Lipopolysaccharide (LPS), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Lipopolysaccharide (LPS) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Pan-species (General) Applications (RESEARCH USE ONLY!)
CPB526Ge11 BSA Conjugated Lipopolysaccharide (LPS) Immunogen; SDS-PAGE; WB.
CPB526Ge21 OVA Conjugated Lipopolysaccharide (LPS) Immunogen; SDS-PAGE; WB.
PAB526Ge01 Polyclonal Antibody to Lipopolysaccharide (LPS) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
LAB526Ge71 Biotin-Linked Polyclonal Antibody to Lipopolysaccharide (LPS) WB; IHC; ICC.
LAB526Ge81 FITC-Linked Polyclonal Antibody to Lipopolysaccharide (LPS) WB; IHC; ICC; IF.
MAB526Ge21 Monoclonal Antibody to Lipopolysaccharide (LPS) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
MAB526Ge22 Monoclonal Antibody to Lipopolysaccharide (LPS) ELISA, CLIA. / IHC-Fr, ICC, IP (predicted).
LAB526Ge72 Biotin-Linked Monoclonal Antibody to Lipopolysaccharide (LPS) WB; IHC; ICC.
LAB526Ge82 FITC-Linked Monoclonal Antibody to Lipopolysaccharide (LPS) WB; IHC; ICC; IF.
SEB526Ge ELISA Kit for Lipopolysaccharide (LPS) Enzyme-linked immunosorbent assay for Antigen Detection.
IEB526Ge Instant ELISA Kit for Lipopolysaccharide (LPS) Enzyme-linked immunosorbent assay for Antigen Detection.
MEB526Ge Mini Samples ELISA Kit for Lipopolysaccharide (LPS) Enzyme-linked immunosorbent assay for Antigen Detection.
HEB526Ge High Sensitive ELISA Kit for Lipopolysaccharide (LPS) Enzyme-linked immunosorbent assay for Antigen Detection.
CEB526Ge ELISA Kit for Lipopolysaccharide (LPS) Enzyme-linked immunosorbent assay for Antigen Detection.
KSB526Ge01 ELISA Kit DIY Materials for Lipopolysaccharide (LPS) Main materials for "Do It(ELISA Kit) Yourself"
KSB526Ge11 ELISA Kit DIY Materials for Lipopolysaccharide (LPS) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK