High Sensitive ELISA Kit for Ecotin (ECO)

  • High Sensitive ELISA Kit for Ecotin (ECO) Packages (Simulation)
  • High Sensitive ELISA Kit for Ecotin (ECO) Packages (Simulation)
  • High Sensitive ELISA Kit for Ecotin (ECO) Results demonstration
  • HEX655Ge.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Ecotin (ECO)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Ecotin (ECO).
No significant cross-reactivity or interference between High Sensitive Ecotin (ECO) and analogues was observed.

Precision of the High Sensitive ELISA Kit for Ecotin (ECO)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Ecotin (ECO) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Ecotin (ECO) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the High Sensitive ELISA Kit for Ecotin (ECO)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Ecotin (ECO)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Ecotin (ECO)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Ecotin (ECO). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Ecotin (ECO). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Ecotin (ECO), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Ecotin (ECO) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Pan-species (General) Applications (RESEARCH USE ONLY!)
RPX655Ge01 Recombinant Ecotin (ECO) Positive Control; Immunogen; SDS-PAGE; WB.
PAX655Ge01 Polyclonal Antibody to Ecotin (ECO) WB; IHC; ICC; IP.
LAX655Ge71 Biotin-Linked Polyclonal Antibody to Ecotin (ECO) WB; IHC; ICC.
SEX655Ge ELISA Kit for Ecotin (ECO) Enzyme-linked immunosorbent assay for Antigen Detection.
HEX655Ge High Sensitive ELISA Kit for Ecotin (ECO) Enzyme-linked immunosorbent assay for Antigen Detection.
KSX655Ge01 ELISA Kit DIY Materials for Ecotin (ECO) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK