ELISA Kit for Serum Amyloid A (SAA)

SA-A; SAA1; PIG4; TP53I4; Amyloid protein A; Amyloid fibril protein AA; Serum amyloid A-1 protein

  • ELISA Kit for Serum Amyloid A (SAA) Packages (Simulation)
  • ELISA Kit for Serum Amyloid A (SAA) Packages (Simulation)
  • ELISA Kit for Serum Amyloid A (SAA) Results demonstration
  • SEA885Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Serum Amyloid A (SAA)

This assay has high sensitivity and excellent specificity for detection of Serum Amyloid A (SAA).
No significant cross-reactivity or interference between Serum Amyloid A (SAA) and analogues was observed.

Recovery of the ELISA Kit for Serum Amyloid A (SAA)

Matrices listed below were spiked with certain level of recombinant Serum Amyloid A (SAA) and the recovery rates were calculated by comparing the measured value to the expected amount of Serum Amyloid A (SAA) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 86-93 89
EDTA plasma(n=5) 96-105 101
heparin plasma(n=5) 88-95 92

Precision of the ELISA Kit for Serum Amyloid A (SAA)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Serum Amyloid A (SAA) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Serum Amyloid A (SAA) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the ELISA Kit for Serum Amyloid A (SAA)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Serum Amyloid A (SAA) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 78-96% 90-97% 98-105% 86-95%
EDTA plasma(n=5) 82-99% 89-97% 92-101% 85-99%
heparin plasma(n=5) 83-98% 84-98% 89-99% 96-103%

Stability of the ELISA Kit for Serum Amyloid A (SAA)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Serum Amyloid A (SAA)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Serum Amyloid A (SAA)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Serum Amyloid A (SAA). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Serum Amyloid A (SAA). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Serum Amyloid A (SAA), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Serum Amyloid A (SAA) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
APA885Hu01 Active Serum Amyloid A (SAA) Cell culture; Activity Assays.
RPA885Hu01 Recombinant Serum Amyloid A (SAA) Positive Control; Immunogen; SDS-PAGE; WB.
CPA885Hu21 OVA Conjugated Serum Amyloid A (SAA) Immunogen; SDS-PAGE; WB.
PAA885Hu02 Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IP.
PAA885Hu01 Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IP.
LAA885Hu81 FITC-Linked Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IF.
LAA885Hu71 Biotin-Linked Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC.
MAA885Hu22 Monoclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IP.
LAA885Hu72 Biotin-Linked Monoclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC.
SEA885Hu ELISA Kit for Serum Amyloid A (SAA) Enzyme-linked immunosorbent assay for Antigen Detection.
CEA885Hu ELISA Kit for Serum Amyloid A (SAA) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA885Hu CLIA Kit for Serum Amyloid A (SAA) Chemiluminescent immunoassay for Antigen Detection.
PSA885Hu01 Antibody Pair for Serum Amyloid A (SAA) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSA885Hu11 ELISA Kit DIY Materials for Serum Amyloid A (SAA) Main materials for "Do It(ELISA Kit) Yourself"
KSA885Hu01 ELISA Kit DIY Materials for Serum Amyloid A (SAA) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK