ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
OHB; BHBA; Beta-Hydroxybutyrate; 3-Hydroxybutyric Acid; β-Hydroxybutyric acid
- Product No.CEB022Ge
- Organism SpeciesPan-species (General) Same name, Different species.
- Test MethodCompetitive Inhibition
- Assay Length2h
- Detection Range1.23-100ug/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.44ug/mL.
- Sample Typeserum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Download Instruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
-
FOB
US$ 565
For more details, please contact local distributors!US$ 808
For more details, please contact local distributors! US$ 3634
For more details, please contact local distributors! US$ 6864
For more details, please contact local distributors! US$ 56525
For more details, please contact local distributors!
Specificity of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
This assay has high sensitivity and excellent specificity for detection of Beta-Hydroxybutyric Acid (bHB).
No significant cross-reactivity or interference between Beta-Hydroxybutyric Acid (bHB) and analogues was observed.
Recovery of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
Matrices listed below were spiked with certain level of Beta-Hydroxybutyric Acid (bHB) and the recovery rates were calculated by comparing the measured value to the expected amount of Beta-Hydroxybutyric Acid (bHB) in samples.
Matrix | Recovery range (%) | Average(%) |
serum(n=5) | 86-97 | 90 |
EDTA plasma(n=5) | 89-105 | 98 |
heparin plasma(n=5) | 81-90 | 85 |
Precision of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Beta-Hydroxybutyric Acid (bHB) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Beta-Hydroxybutyric Acid (bHB) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Linearity of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Beta-Hydroxybutyric Acid (bHB) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
Sample | 1:2 | 1:4 | 1:8 | 1:16 |
serum(n=5) | 90-97% | 97-105% | 97-105% | 96-104% |
EDTA plasma(n=5) | 84-92% | 95-103% | 95-103% | 86-101% |
heparin plasma(n=5) | 85-102% | 84-103% | 79-89% | 95-105% |
Stability of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
And then add 50µL prepared Detection Reagent A immediately.
Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
7. Add 50µL Stop Solution. Read at 450 nm immediately.
Test principle of the ELISA Kit for Beta-Hydroxybutyric Acid (bHB)
This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Beta-Hydroxybutyric Acid (bHB) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Beta-Hydroxybutyric Acid (bHB) and unlabeled Beta-Hydroxybutyric Acid (bHB) (Standards or samples) with the pre-coated antibody specific to Beta-Hydroxybutyric Acid (bHB). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Beta-Hydroxybutyric Acid (bHB) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Beta-Hydroxybutyric Acid (bHB) in the sample.
GIVEAWAYS
INCREMENT SERVICES
Related products
Catalog No. | Organism species: Pan-species (General) | Applications (RESEARCH USE ONLY!) |
CPB022Ge11 | BSA Conjugated Beta-Hydroxybutyric Acid (bHB) | Immunogen; SDS-PAGE; WB. |
CPB022Ge21 | OVA Conjugated Beta-Hydroxybutyric Acid (bHB) | Immunogen; SDS-PAGE; WB. |
PAB022Ge01 | Polyclonal Antibody to Beta-Hydroxybutyric Acid (bHB) | WB; IHC; ICC; IP. |
CEB022Ge | ELISA Kit for Beta-Hydroxybutyric Acid (bHB) | Enzyme-linked immunosorbent assay for Antigen Detection. |
LMB022Ge | Multiplex Assay Kit for Beta-Hydroxybutyric Acid (bHB) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |
KSB022Ge11 | ELISA Kit DIY Materials for Beta-Hydroxybutyric Acid (bHB) | Main materials for "Do It (ELISA Kit) Yourself". |