CLIA Kit for Sirtuin 1 (SIRT1)

SIR2L1; Silent Mating Type Information Regulation 2 Homolog 1; NAD-Dependent Deacetylase Sirtuin-1; SIR2-like protein 1; SirtT1 75 kDa fragment

  • CLIA Kit for Sirtuin 1 (SIRT1) Packages (Simulation)
  • CLIA Kit for Sirtuin 1 (SIRT1) Packages (Simulation)
  • CLIA Kit for Sirtuin 1 (SIRT1) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Sirtuin 1 (SIRT1)

This assay has high sensitivity and excellent specificity for detection of Sirtuin 1 (SIRT1).
No significant cross-reactivity or interference between Sirtuin 1 (SIRT1) and analogues was observed.

Precision of the CLIA Kit for Sirtuin 1 (SIRT1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Sirtuin 1 (SIRT1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Sirtuin 1 (SIRT1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the CLIA Kit for Sirtuin 1 (SIRT1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Sirtuin 1 (SIRT1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Sirtuin 1 (SIRT1)

The microplate provided in this kit has been pre-coated with an antibody specific to Sirtuin 1 (SIRT1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Sirtuin 1 (SIRT1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Sirtuin 1 (SIRT1) level in the sample or standard.;

Related products

Catalog No. Organism species: Rattus norvegicus (Rat) Applications (RESEARCH USE ONLY!)
RPE912Ra01 Recombinant Sirtuin 1 (SIRT1) Positive Control; Immunogen; SDS-PAGE; WB.
RPE912Ra02 Recombinant Sirtuin 1 (SIRT1) Positive Control; Immunogen; SDS-PAGE; WB.
PAE912Ra01 Polyclonal Antibody to Sirtuin 1 (SIRT1) WB; IHC; ICC; IP.
PAE912Ra02 Polyclonal Antibody to Sirtuin 1 (SIRT1) WB; IHC; ICC; IP.
MAE912Ra21 Monoclonal Antibody to Sirtuin 1 (SIRT1) WB; IHC; ICC; IP.
SEE912Ra ELISA Kit for Sirtuin 1 (SIRT1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCE912Ra CLIA Kit for Sirtuin 1 (SIRT1) Chemiluminescent immunoassay for Antigen Detection.
LME912Ra Multiplex Assay Kit for Sirtuin 1 (SIRT1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK