CLIA Kit for Serum Amyloid A (SAA)

SA-A; SAA1; PIG4; TP53I4; Amyloid protein A; Amyloid fibril protein AA; Serum amyloid A-1 protein

  • CLIA Kit for Serum Amyloid A (SAA) Packages (Simulation)
  • CLIA Kit for Serum Amyloid A (SAA) Packages (Simulation)
  • CLIA Kit for Serum Amyloid A (SAA) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Serum Amyloid A (SAA)

This assay has high sensitivity and excellent specificity for detection of Serum Amyloid A (SAA).
No significant cross-reactivity or interference between Serum Amyloid A (SAA) and analogues was observed.

Recovery of the CLIA Kit for Serum Amyloid A (SAA)

Matrices listed below were spiked with certain level of recombinant Serum Amyloid A (SAA) and the recovery rates were calculated by comparing the measured value to the expected amount of Serum Amyloid A (SAA) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 99-105 102
EDTA plasma(n=5) 91-101 96
heparin plasma(n=5) 79-103 98

Precision of the CLIA Kit for Serum Amyloid A (SAA)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Serum Amyloid A (SAA) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Serum Amyloid A (SAA) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the CLIA Kit for Serum Amyloid A (SAA)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Serum Amyloid A (SAA) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 92-101% 79-98% 82-98% 87-95%
EDTA plasma(n=5) 97-105% 86-94% 82-101% 91-101%
heparin plasma(n=5) 90-104% 95-102% 86-99% 96-103%

Stability of the CLIA Kit for Serum Amyloid A (SAA)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Serum Amyloid A (SAA)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Serum Amyloid A (SAA)

The microplate provided in this kit has been pre-coated with an antibody specific to Serum Amyloid A (SAA). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Serum Amyloid A (SAA). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Serum Amyloid A (SAA) level in the sample or standard.;

Related products

Catalog No. Organism species: Oryctolagus cuniculus (Rabbit) Applications (RESEARCH USE ONLY!)
RPA885Rb02 Recombinant Serum Amyloid A (SAA) Positive Control; Immunogen; SDS-PAGE; WB.
RPA885Rb01 Recombinant Serum Amyloid A (SAA) Positive Control; Immunogen; SDS-PAGE; WB.
PAA885Rb01 Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IP.
PAA885Rb51 Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IP.
PAA885Rb52 Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IP.
LAA885Rb71 Biotin-Linked Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC.
LAA885Rb81 FITC-Linked Polyclonal Antibody to Serum Amyloid A (SAA) WB; IHC; ICC; IF.
SEA885Rb ELISA Kit for Serum Amyloid A (SAA) Enzyme-linked immunosorbent assay for Antigen Detection.
CEA885Rb ELISA Kit for Serum Amyloid A (SAA) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA885Rb CLIA Kit for Serum Amyloid A (SAA) Chemiluminescent immunoassay for Antigen Detection.
LMA885Rb Multiplex Assay Kit for Serum Amyloid A (SAA) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK