Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

FG-B; Fibrinopeptide B; Fibrinogen Beta

  • Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB) Packages (Simulation)
  • Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB) Packages (Simulation)
  • Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB) Results demonstration
  • MEB215Mu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

This assay has high sensitivity and excellent specificity for detection of Mini Samples Fibrinogen Beta Chain (FGB).
No significant cross-reactivity or interference between Mini Samples Fibrinogen Beta Chain (FGB) and analogues was observed.

Recovery of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

Matrices listed below were spiked with certain level of recombinant Mini Samples Fibrinogen Beta Chain (FGB) and the recovery rates were calculated by comparing the measured value to the expected amount of Mini Samples Fibrinogen Beta Chain (FGB) in samples.

Matrix Recovery range (%) Average(%)
sodium citrate plasma(n=5) 91-105 99

Precision of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mini Samples Fibrinogen Beta Chain (FGB) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mini Samples Fibrinogen Beta Chain (FGB) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Mini Samples Fibrinogen Beta Chain (FGB) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
sodium citrate plasma(n=5) 86-97% 80-96% 80-101% 78-93%

Stability of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

1. Prepare all reagents, samples and standards;
2. Add 25µL standard or sample to each well. Incubate 1 hour at 37°C;
3. Aspirate and add 25µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 25µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 25µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 20µL Stop Solution. Read at 450nm immediately.

Test principle of the Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Mini Samples Fibrinogen Beta Chain (FGB). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Mini Samples Fibrinogen Beta Chain (FGB). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Mini Samples Fibrinogen Beta Chain (FGB), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Mini Samples Fibrinogen Beta Chain (FGB) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPB215Mu01 Recombinant Fibrinogen Beta Chain (FGB) Positive Control; Immunogen; SDS-PAGE; WB.
APB215Mu01 Active Fibrinogen Beta Chain (FGB) Cell culture; Activity Assays.
RPB215Mu02 Recombinant Fibrinogen Beta Chain (FGB) Positive Control; Immunogen; SDS-PAGE; WB.
PAB215Mu01 Polyclonal Antibody to Fibrinogen Beta Chain (FGB) WB; IHC; ICC; IP.
PAB215Mu02 Polyclonal Antibody to Fibrinogen Beta Chain (FGB) WB; IHC; ICC; IP.
MEB215Mu Mini Samples ELISA Kit for Fibrinogen Beta Chain (FGB) Enzyme-linked immunosorbent assay for Antigen Detection.
SEB215Mu ELISA Kit for Fibrinogen Beta Chain (FGB) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB215Mu Multiplex Assay Kit for Fibrinogen Beta Chain (FGB) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB215Mu01 ELISA Kit DIY Materials for Fibrinogen Beta Chain (FGB) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK