Magnetic Luminex Assay Kit for Arginase (ARG)

ARG1; Arginase I; Liver Arginase

  • Magnetic Luminex Assay Kit for Arginase (ARG) Packages (Simulation)
  • Magnetic Luminex Assay Kit for Arginase (ARG) Packages (Simulation)
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the Magnetic Luminex Assay Kit for Arginase (ARG)

This assay has high sensitivity and excellent specificity for detection of Arginase (ARG).
No significant cross-reactivity or interference between Arginase (ARG) and analogues was observed.

Recovery of the Magnetic Luminex Assay Kit for Arginase (ARG)

Matrices listed below were spiked with certain level of recombinant Arginase (ARG) and the recovery rates were calculated by comparing the measured value to the expected amount of Arginase (ARG) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 91-104 101
EDTA plasma(n=5) 80-101 88
heparin plasma(n=5) 89-97 94

Precision of the Magnetic Luminex Assay Kit for Arginase (ARG)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Arginase (ARG) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Arginase (ARG) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the Magnetic Luminex Assay Kit for Arginase (ARG)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Arginase (ARG) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 87-101% 80-104% 94-101% 82-93%
EDTA plasma(n=5) 98-105% 82-98% 88-102% 80-104%
heparin plasma(n=5) 81-88% 92-102% 87-94% 80-90%

Stability of the Magnetic Luminex Assay Kit for Arginase (ARG)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the Magnetic Luminex Assay Kit for Arginase (ARG)

1. Preparation of standards, reagents and samples before the experiment;
2. Add 100μL standard or sample to each well,
    add 10μL magnetic beads, and incubate 90min at 37°C on shaker;
3. Remove liquid on magnetic frame, add 100μL prepared Detection Reagent A. Incubate 60min at 37°C on shaker;
4. Wash plate on magnetic frame for three times;
5. Add 100μL prepared Detection Reagent B, and incubate 30 min at 37°C on shaker;
6. Wash plate on magnetic frame for three times;
7. Add 100μL sheath solution, swirl for 2 minutes, read on the machine.

Test principle of the Magnetic Luminex Assay Kit for Arginase (ARG)

Analyte-specific antibodies are pre-coated onto color-coded microparticles. Microparticles, standards, and samples are pipetted into wells and the immobilized antibodies bind the analytes of interest. After washing away any unbound substances, a biotinylated antibody cocktail specific to the analytes of interest is added to each well. Following a wash to remove any unbound biotinylated antibody, Streptavidin-Phycoerythrin conjugate (Streptavidin-PE), which binds to the biotinylated detection antibodies, is added to each well. A final wash removes unbound Streptavidin-PE and the microparticles are resuspended in buffer and read using the Luminex or Bio-Plex analyzer.The MFI developed is proportional to the concentration of analytes of interest in the sample.

GIVEAWAYS

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPB120Mu02 Recombinant Arginase (ARG) Positive Control; Immunogen; SDS-PAGE; WB.
RPB120Mu01 Recombinant Arginase (ARG) Positive Control; Immunogen; SDS-PAGE; WB.
APB120Mu01 Active Arginase (ARG) Cell culture; Activity Assays.
PAB120Mu01 Polyclonal Antibody to Arginase (ARG) WB; IHC; ICC; IP.
PAB120Mu02 Polyclonal Antibody to Arginase (ARG) WB; IHC; ICC; IP.
LAB120Mu81 FITC-Linked Polyclonal Antibody to Arginase (ARG) WB; IHC; ICC; IF.
LAB120Mu71 Biotin-Linked Polyclonal Antibody to Arginase (ARG) WB; IHC; ICC.
SEB120Mu ELISA Kit for Arginase (ARG) Enzyme-linked immunosorbent assay for Antigen Detection.
MEB120Mu Mini Samples ELISA Kit for Arginase (ARG) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB120Mu Magnetic Luminex Assay Kit for Arginase (ARG) Magnetic Luminex Assay for Antigen Detection.
KSB120Mu01 ELISA Kit DIY Materials for Arginase (ARG) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK