High Sensitive ELISA Kit for Apolipoprotein B (APOB)

Apo-B; FLDB; Apo B-100; Apo B-48

  • High Sensitive ELISA Kit for Apolipoprotein B (APOB) Packages (Simulation)
  • High Sensitive ELISA Kit for Apolipoprotein B (APOB) Packages (Simulation)
  • High Sensitive ELISA Kit for Apolipoprotein B (APOB) Results demonstration
  • HEC003Mu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

This assay has high sensitivity and excellent specificity for detection of High Sensitive Apolipoprotein B (APOB).
No significant cross-reactivity or interference between High Sensitive Apolipoprotein B (APOB) and analogues was observed.

Recovery of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

Matrices listed below were spiked with certain level of recombinant High Sensitive Apolipoprotein B (APOB) and the recovery rates were calculated by comparing the measured value to the expected amount of High Sensitive Apolipoprotein B (APOB) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 93-101 97
EDTA plasma(n=5) 79-101 83
heparin plasma(n=5) 81-90 86

Precision of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level High Sensitive Apolipoprotein B (APOB) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level High Sensitive Apolipoprotein B (APOB) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of High Sensitive Apolipoprotein B (APOB) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 82-92% 80-96% 91-99% 83-91%
EDTA plasma(n=5) 86-93% 78-101% 82-102% 96-104%
heparin plasma(n=5) 89-96% 99-105% 80-104% 90-97%

Stability of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the High Sensitive ELISA Kit for Apolipoprotein B (APOB)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to High Sensitive Apolipoprotein B (APOB). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to High Sensitive Apolipoprotein B (APOB). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain High Sensitive Apolipoprotein B (APOB), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of High Sensitive Apolipoprotein B (APOB) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPC003Mu02 Recombinant Apolipoprotein B (APOB) Positive Control; Immunogen; SDS-PAGE; WB.
RPC003Mu01 Recombinant Apolipoprotein B (APOB) Positive Control; Immunogen; SDS-PAGE; WB.
PAC003Mu01 Polyclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC; IP.
PAC003Mu02 Polyclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC; IP.
LAC003Mu81 FITC-Linked Polyclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC; IF.
LAC003Mu71 Biotin-Linked Polyclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC.
MAC003Mu22 Monoclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC; IP.
MAC003Mu23 Monoclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC; IP.
MAC003Mu21 Monoclonal Antibody to Apolipoprotein B (APOB) WB; IHC; ICC; IP.
WEC003Mu Wide-range ELISA Kit for Apolipoprotein B (APOB) Enzyme-linked immunosorbent assay for Antigen Detection.
HEC003Mu High Sensitive ELISA Kit for Apolipoprotein B (APOB) Enzyme-linked immunosorbent assay for Antigen Detection.
SEC003Mu ELISA Kit for Apolipoprotein B (APOB) Enzyme-linked immunosorbent assay for Antigen Detection.
SCC003Mu CLIA Kit for Apolipoprotein B (APOB) Chemiluminescent immunoassay for Antigen Detection.
LMC003Mu Multiplex Assay Kit for Apolipoprotein B (APOB) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK