ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1)

CCO; MHS; MHS1; RYDR; RYR; SKRR; Central Core Disease Of Muscle; Skeletal muscle calcium release channel

  • ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1) Packages (Simulation)
  • ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1) Packages (Simulation)
  • ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1) Results demonstration
  • SEC773Mu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1)

This assay has high sensitivity and excellent specificity for detection of Ryanodine Receptor 1, Skeletal (RYR1).
No significant cross-reactivity or interference between Ryanodine Receptor 1, Skeletal (RYR1) and analogues was observed.

Precision of the ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Ryanodine Receptor 1, Skeletal (RYR1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Ryanodine Receptor 1, Skeletal (RYR1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Ryanodine Receptor 1, Skeletal (RYR1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Ryanodine Receptor 1, Skeletal (RYR1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Ryanodine Receptor 1, Skeletal (RYR1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Ryanodine Receptor 1, Skeletal (RYR1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPC773Mu01 Recombinant Ryanodine Receptor 1, Skeletal (RYR1) Positive Control; Immunogen; SDS-PAGE; WB.
RPC773Mu02 Recombinant Ryanodine Receptor 1, Skeletal (RYR1) Positive Control; Immunogen; SDS-PAGE; WB.
PAC773Mu01 Polyclonal Antibody to Ryanodine Receptor 1, Skeletal (RYR1) WB; IHC; ICC; IP.
PAC773Mu02 Polyclonal Antibody to Ryanodine Receptor 1, Skeletal (RYR1) WB; IHC; ICC; IP.
SEC773Mu ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1) Enzyme-linked immunosorbent assay for Antigen Detection.
MEC773Mu Mini Samples ELISA Kit for Ryanodine Receptor 1, Skeletal (RYR1) Enzyme-linked immunosorbent assay for Antigen Detection.
LMC773Mu Multiplex Assay Kit for Ryanodine Receptor 1, Skeletal (RYR1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK