ELISA Kit for Mucin 1 (MUC1)
CD227; EMA; H23AG; KL-6; PEM; PEMT; PUM; CA15-3; CA153; Cancer antigen 15-3; Carcinoma-associated mucin; Episialin; Peanut-reactive urinary mucin; Polymorphic epithelial mucin
- Product No.SEA413Hu
- Organism SpeciesHomo sapiens (Human) Same name, Different species.
- Test MethodDouble-antibody Sandwich
- Assay Length3h
- Detection Range0.625-40ng/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 0.229ng/mL.
- Sample Typetissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Download Instruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
-
FOB
US$ 392
For more details, please contact local distributors!US$ 560
For more details, please contact local distributors! US$ 2520
For more details, please contact local distributors! US$ 4760
For more details, please contact local distributors! US$ 39200
For more details, please contact local distributors!
-
Packages (Simulation)
-
Packages (Simulation)
-
Results demonstration
-
Typical Standard Curve
-
ISO9001: 2008, ISO13485: 2003 Registered
Specificity of the ELISA Kit for Mucin 1 (MUC1)
This assay has high sensitivity and excellent specificity for detection of Mucin 1 (MUC1).
No significant cross-reactivity or interference between Mucin 1 (MUC1) and analogues was observed.
Precision of the ELISA Kit for Mucin 1 (MUC1)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Mucin 1 (MUC1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Mucin 1 (MUC1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Stability of the ELISA Kit for Mucin 1 (MUC1)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the ELISA Kit for Mucin 1 (MUC1)
1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.
Test principle of the ELISA Kit for Mucin 1 (MUC1)
The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Mucin 1 (MUC1). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Mucin 1 (MUC1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Mucin 1 (MUC1), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Mucin 1 (MUC1) in the samples is then determined by comparing the O.D. of the samples to the standard curve.
GIVEAWAYS
INCREMENT SERVICES
Single-component Reagents of Assay Kit
Lysis Buffer Specific for ELISA / CLIA
Quality Control of Kit
ELISA Kit Customized Service
Disease Model Customized Service
Serums Customized Service
TGFB1 Activation Reagent
Real Time PCR Experimental Service
Streptavidin
Fast blue Protein Stain solution
Single-component Reagents of FLIA Kit
Streptavidin-Agarose Beads
Related products
| Catalog No. | Organism species: Homo sapiens (Human) | Applications (RESEARCH USE ONLY!) |
| RPA413Hu01 | Recombinant Mucin 1 (MUC1) | Positive Control; Immunogen; SDS-PAGE; WB. |
| RPA413Hu02 | Recombinant Mucin 1 (MUC1) | Positive Control; Immunogen; SDS-PAGE; WB. |
| RPA413Hu03 | Recombinant Mucin 1 (MUC1) | Positive Control; Immunogen; SDS-PAGE; WB. |
| CPA413Hu21 | OVA Conjugated Mucin 1 (MUC1) | Immunogen; SDS-PAGE; WB. |
| SPA413Hu02 | Synthetic Mucin 1 (MUC1) | Immunogen; Blocking Peptide. |
| PAA413Hu01 | Polyclonal Antibody to Mucin 1 (MUC1) | WB; IHC; ICC; IP. |
| PAA413Hu08 | Polyclonal Antibody to Mucin 1 (MUC1) | WB; IHC; ICC; IP. |
| PAA413Hu02 | Polyclonal Antibody to Mucin 1 (MUC1) | WB; IHC; ICC; IP. |
| PAA413Hu03 | Polyclonal Antibody to Mucin 1 (MUC1) | WB; IHC; ICC; IP. |
| LAA413Hu81 | FITC-Linked Polyclonal Antibody to Mucin 1 (MUC1) | WB; IHC; ICC; IF. |
| LAA413Hu71 | Biotin-Linked Polyclonal Antibody to Mucin 1 (MUC1) | WB; IHC; ICC. |
| RAA413Hu21 | Recombinant Antibody to Mucin 1 (MUC1) | WB; IF; ICC; IHC; IP; FCM. |
| MAA413Hu22 | Monoclonal Antibody to Mucin 1 (MUC1) | WB |
| SEA413Hu | ELISA Kit for Mucin 1 (MUC1) | Enzyme-linked immunosorbent assay for Antigen Detection. |
| SCA413Hu | CLIA Kit for Mucin 1 (MUC1) | Chemiluminescent immunoassay for Antigen Detection. |
| LMA413Hu | Multiplex Assay Kit for Mucin 1 (MUC1) ,etc. by FLIA (Flow Luminescence Immunoassay) | FLIA Kit for Antigen Detection. |
| KSA413Hu01 | ELISA Kit DIY Materials for Mucin 1 (MUC1) | Main materials for "Do It (ELISA Kit) Yourself". |