ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR)

LISCH7; ILDR3; LISCH; Lipolysis-Stimulated Remnant; Immunoglobulin-Like Domain Containing Receptor 3

  • ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR) Packages (Simulation)
  • ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR) Packages (Simulation)
  • ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR) Results demonstration
  • SED744Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR)

This assay has high sensitivity and excellent specificity for detection of Lipolysis Stimulated Lipoprotein Receptor (LSR).
No significant cross-reactivity or interference between Lipolysis Stimulated Lipoprotein Receptor (LSR) and analogues was observed.

Precision of the ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Lipolysis Stimulated Lipoprotein Receptor (LSR) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Lipolysis Stimulated Lipoprotein Receptor (LSR) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Lipolysis Stimulated Lipoprotein Receptor (LSR). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Lipolysis Stimulated Lipoprotein Receptor (LSR). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Lipolysis Stimulated Lipoprotein Receptor (LSR), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Lipolysis Stimulated Lipoprotein Receptor (LSR) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPD744Hu01 Recombinant Lipolysis Stimulated Lipoprotein Receptor (LSR) Positive Control; Immunogen; SDS-PAGE; WB.
RPD744Hu02 Recombinant Lipolysis Stimulated Lipoprotein Receptor (LSR) Positive Control; Immunogen; SDS-PAGE; WB.
PAD744Hu01 Polyclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB,IHC
LAD744Hu71 Biotin-Linked Polyclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC; ICC.
LAD744Hu81 FITC-Linked Polyclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC; ICC; IF.
MAD744Hu21 Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB,IHC
MAD744Hu27 Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB
MAD744Hu23 Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC; ICC; IP.
MAD744Hu24 Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC; ICC; IP.
MAD744Hu25 Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC; ICC; IP.
MAD744Hu22 Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC
LAD744Hu72 Biotin-Linked Monoclonal Antibody to Lipolysis Stimulated Lipoprotein Receptor (LSR) WB; IHC; ICC.
SED744Hu ELISA Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR) Enzyme-linked immunosorbent assay for Antigen Detection.
LMD744Hu Multiplex Assay Kit for Lipolysis Stimulated Lipoprotein Receptor (LSR) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
PSD744Hu01 Antibody Pair for Lipolysis Stimulated Lipoprotein Receptor (LSR) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSD744Hu01 ELISA Kit DIY Materials for Lipolysis Stimulated Lipoprotein Receptor (LSR) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK