ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

A-FABP; AFABP; AP2; Fatty Acid Binding Protein 4, Adipocyte; Adipocyte Protein 2; Adipocyte-type fatty acid-binding protein

  • ELISA Kit for Fatty Acid Binding Protein 4 (FABP4) Packages (Simulation)
  • ELISA Kit for Fatty Acid Binding Protein 4 (FABP4) Packages (Simulation)
  • ELISA Kit for Fatty Acid Binding Protein 4 (FABP4) Results demonstration
  • SEB693Mu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

This assay has high sensitivity and excellent specificity for detection of Fatty Acid Binding Protein 4 (FABP4).
No significant cross-reactivity or interference between Fatty Acid Binding Protein 4 (FABP4) and analogues was observed.

Recovery of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

Matrices listed below were spiked with certain level of recombinant Fatty Acid Binding Protein 4 (FABP4) and the recovery rates were calculated by comparing the measured value to the expected amount of Fatty Acid Binding Protein 4 (FABP4) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 85-97 91
EDTA plasma(n=5) 78-101 92
heparin plasma(n=5) 94-101 98

Precision of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Fatty Acid Binding Protein 4 (FABP4) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Fatty Acid Binding Protein 4 (FABP4) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Fatty Acid Binding Protein 4 (FABP4) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 84-91% 85-93% 91-102% 84-91%
EDTA plasma(n=5) 91-105% 80-104% 84-104% 78-99%
heparin plasma(n=5) 92-105% 96-105% 86-101% 78-94%

Stability of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 90µL Substrate Solution. Incubate 10-20 minutes at 37°C;
8. Add 50µL Stop Solution. Read at 450nm immediately.

Test principle of the ELISA Kit for Fatty Acid Binding Protein 4 (FABP4)

The test principle applied in this kit is Sandwich enzyme immunoassay. The microtiter plate provided in this kit has been pre-coated with an antibody specific to Fatty Acid Binding Protein 4 (FABP4). Standards or samples are then added to the appropriate microtiter plate wells with a biotin-conjugated antibody specific to Fatty Acid Binding Protein 4 (FABP4). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. After TMB substrate solution is added, only those wells that contain Fatty Acid Binding Protein 4 (FABP4), biotin-conjugated antibody and enzyme-conjugated Avidin will exhibit a change in color. The enzyme-substrate reaction is terminated by the addition of sulphuric acid solution and the color change is measured spectrophotometrically at a wavelength of 450nm ± 10nm. The concentration of Fatty Acid Binding Protein 4 (FABP4) in the samples is then determined by comparing the O.D. of the samples to the standard curve.

Related products

Catalog No. Organism species: Mus musculus (Mouse) Applications (RESEARCH USE ONLY!)
RPB693Mu02 Recombinant Fatty Acid Binding Protein 4 (FABP4) Positive Control; Immunogen; SDS-PAGE; WB.
RPB693Mu01 Recombinant Fatty Acid Binding Protein 4 (FABP4) Positive Control; Immunogen; SDS-PAGE; WB.
EPB693Mu61 Eukaryotic Fatty Acid Binding Protein 4 (FABP4) Positive Control; Immunogen; SDS-PAGE; WB.
APB693Mu61 Active Fatty Acid Binding Protein 4 (FABP4) Cell culture; Activity Assays.
PAB693Mu06 Polyclonal Antibody to Fatty Acid Binding Protein 4 (FABP4) WB; IHC; ICC; IP.
PAB693Mu02 Polyclonal Antibody to Fatty Acid Binding Protein 4 (FABP4) WB; IHC; ICC; IP.
PAB693Mu01 Polyclonal Antibody to Fatty Acid Binding Protein 4 (FABP4) WB; IHC; ICC; IP.
LAB693Mu71 Biotin-Linked Polyclonal Antibody to Fatty Acid Binding Protein 4 (FABP4) WB; IHC; ICC.
LAB693Mu81 FITC-Linked Polyclonal Antibody to Fatty Acid Binding Protein 4 (FABP4) WB; IHC; ICC; IF.
SEB693Mu ELISA Kit for Fatty Acid Binding Protein 4 (FABP4) Enzyme-linked immunosorbent assay for Antigen Detection.
LMB693Mu Multiplex Assay Kit for Fatty Acid Binding Protein 4 (FABP4) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
KSB693Mu01 ELISA Kit DIY Materials for Fatty Acid Binding Protein 4 (FABP4) Main materials for "Do It(ELISA Kit) Yourself"
GUESTBOOK