CLIA Kit for Wilms Tumor Protein (WT1)

WAGR; GUD; WIT-2; WT33

  • CLIA Kit for Wilms Tumor Protein (WT1) Packages (Simulation)
  • CLIA Kit for Wilms Tumor Protein (WT1) Packages (Simulation)
  • CLIA Kit for Wilms Tumor Protein (WT1) Results demonstration
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Wilms Tumor Protein (WT1)

This assay has high sensitivity and excellent specificity for detection of Wilms Tumor Protein (WT1).
No significant cross-reactivity or interference between Wilms Tumor Protein (WT1) and analogues was observed.

Precision of the CLIA Kit for Wilms Tumor Protein (WT1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Wilms Tumor Protein (WT1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Wilms Tumor Protein (WT1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the CLIA Kit for Wilms Tumor Protein (WT1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Wilms Tumor Protein (WT1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Wilms Tumor Protein (WT1)

The microplate provided in this kit has been pre-coated with an antibody specific to Wilms Tumor Protein (WT1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Wilms Tumor Protein (WT1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Wilms Tumor Protein (WT1) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPF116Hu02 Recombinant Wilms Tumor Protein (WT1) Positive Control; Immunogen; SDS-PAGE; WB.
RPF116Hu01 Recombinant Wilms Tumor Protein (WT1) Positive Control; Immunogen; SDS-PAGE; WB.
RPF116Hu03 Recombinant Wilms Tumor Protein (WT1) Positive Control; Immunogen; SDS-PAGE; WB.
CPF116Hu21 OVA Conjugated Wilms Tumor Protein (WT1) Immunogen; SDS-PAGE; WB.
PAF116Hu02 Polyclonal Antibody to Wilms Tumor Protein (WT1) WB; IHC; ICC; IP.
PAF116Hu08 Polyclonal Antibody to Wilms Tumor Protein (WT1) WB; IHC; ICC; IP.
PAF116Hu01 Polyclonal Antibody to Wilms Tumor Protein (WT1) WB; IHC; ICC; IP.
MAF116Hu22 Monoclonal Antibody to Wilms Tumor Protein (WT1) WB; IHC; ICC; IP.
MAF116Hu21 Monoclonal Antibody to Wilms Tumor Protein (WT1) WB; IHC; ICC; IP.
SEF116Hu ELISA Kit for Wilms Tumor Protein (WT1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCF116Hu CLIA Kit for Wilms Tumor Protein (WT1) Chemiluminescent immunoassay for Antigen Detection.
LMF116Hu Multiplex Assay Kit for Wilms Tumor Protein (WT1) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK