CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

CD274; PDCD1LG1; B7-H; B7H1; PD-L1; PDCD1L1; PDCD1-LG1; Programed Death Ligand 1

  • CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Packages (Simulation)
  • CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Packages (Simulation)
  • CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Results demonstration
  • SCA788Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

This assay has high sensitivity and excellent specificity for detection of Programmed Cell Death Protein 1 Ligand 1 (PDL1).
No significant cross-reactivity or interference between Programmed Cell Death Protein 1 Ligand 1 (PDL1) and analogues was observed.

Recovery of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

Matrices listed below were spiked with certain level of recombinant Programmed Cell Death Protein 1 Ligand 1 (PDL1) and the recovery rates were calculated by comparing the measured value to the expected amount of Programmed Cell Death Protein 1 Ligand 1 (PDL1) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 84-98 90
EDTA plasma(n=5) 80-101 86
heparin plasma(n=5) 90-105 94

Precision of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Programmed Cell Death Protein 1 Ligand 1 (PDL1) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Programmed Cell Death Protein 1 Ligand 1 (PDL1) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Programmed Cell Death Protein 1 Ligand 1 (PDL1) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 91-105% 97-105% 94-103% 97-104%
EDTA plasma(n=5) 89-96% 80-89% 98-105% 92-99%
heparin plasma(n=5) 93-101% 89-96% 88-102% 80-93%

Stability of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1)

The microplate provided in this kit has been pre-coated with an antibody specific to Programmed Cell Death Protein 1 Ligand 1 (PDL1). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Programmed Cell Death Protein 1 Ligand 1 (PDL1). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Programmed Cell Death Protein 1 Ligand 1 (PDL1) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPA788Hu01 Recombinant Programmed Cell Death Protein 1 Ligand 1 (PDL1) Positive Control; Immunogen; SDS-PAGE; WB.
EPA788Hu61 Eukaryotic Programmed Cell Death Protein 1 Ligand 1 (PDL1) Positive Control; Immunogen; SDS-PAGE; WB.
PAA788Hu01 Polyclonal Antibody to Programmed Cell Death Protein 1 Ligand 1 (PDL1) WB; IHC; ICC; IP.
FAA788Hu01 Anti-Programmed Cell Death Protein 1 Ligand 1 (PDL1) Polyclonal Antibody Flow cytometry.
FAA788Hu41 PE-Linked Anti-Programmed Cell Death Protein 1 Ligand 1 (PDL1) Polyclonal Antibody Flow cytometry.
FAA788Hu51 APC-Linked Anti-Programmed Cell Death Protein 1 Ligand 1 (PDL1) Polyclonal Antibody Flow cytometry.
FAA788Hu81 FITC-Linked Anti-Programmed Cell Death Protein 1 Ligand 1 (PDL1) Polyclonal Antibody Flow cytometry.
MAA788Hu22 Monoclonal Antibody to Programmed Cell Death Protein 1 Ligand 1 (PDL1) WB; IHC; ICC; IP.
MAA788Hu21 Monoclonal Antibody to Programmed Cell Death Protein 1 Ligand 1 (PDL1) WB; IHC; ICC; IP.
LAA788Hu72 Biotin-Linked Monoclonal Antibody to Programmed Cell Death Protein 1 Ligand 1 (PDL1) WB; IHC; ICC.
WEA788Hu Wide-range ELISA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Enzyme-linked immunosorbent assay for Antigen Detection.
SEA788Hu ELISA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Enzyme-linked immunosorbent assay for Antigen Detection.
SCA788Hu CLIA Kit for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Chemiluminescent immunoassay for Antigen Detection.
PSA788Hu01 Antibody Pair for Programmed Cell Death Protein 1 Ligand 1 (PDL1) ELISA; CLIA; ELISPOT; Luminex; Immunochromatography and other Immunoassays.
KSA788Hu01 ELISA Kit DIY Materials for Programmed Cell Death Protein 1 Ligand 1 (PDL1) Main materials for "Do It (ELISA Kit) Yourself".
GUESTBOOK