CLIA Kit for Kruppel Like Factor 15 (KLF15)

KKLF; Kidney-Enriched Kruppel-Like Factor

  • CLIA Kit for Kruppel Like Factor 15 (KLF15) Packages (Simulation)
  • CLIA Kit for Kruppel Like Factor 15 (KLF15) Packages (Simulation)
  • CLIA Kit for Kruppel Like Factor 15 (KLF15) Results demonstration
  • SCD370Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Kruppel Like Factor 15 (KLF15)

This assay has high sensitivity and excellent specificity for detection of Kruppel Like Factor 15 (KLF15).
No significant cross-reactivity or interference between Kruppel Like Factor 15 (KLF15) and analogues was observed.

Precision of the CLIA Kit for Kruppel Like Factor 15 (KLF15)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Kruppel Like Factor 15 (KLF15) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Kruppel Like Factor 15 (KLF15) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Stability of the CLIA Kit for Kruppel Like Factor 15 (KLF15)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Kruppel Like Factor 15 (KLF15)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Kruppel Like Factor 15 (KLF15)

The microplate provided in this kit has been pre-coated with an antibody specific to Kruppel Like Factor 15 (KLF15). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Kruppel Like Factor 15 (KLF15). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Kruppel Like Factor 15 (KLF15) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPD370Hu01 Recombinant Kruppel Like Factor 15 (KLF15) Positive Control; Immunogen; SDS-PAGE; WB.
PAD370Hu01 Polyclonal Antibody to Kruppel Like Factor 15 (KLF15) WB; IHC; ICC; IP.
MAD370Hu21 Monoclonal Antibody to Kruppel Like Factor 15 (KLF15) WB; IHC; ICC; IP.
SED370Hu ELISA Kit for Kruppel Like Factor 15 (KLF15) Enzyme-linked immunosorbent assay for Antigen Detection.
SCD370Hu CLIA Kit for Kruppel Like Factor 15 (KLF15) Chemiluminescent immunoassay for Antigen Detection.
LMD370Hu Multiplex Assay Kit for Kruppel Like Factor 15 (KLF15) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK