CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
GNRH1; GRH; LNRH; LHRH; LH-RH I; Luliberin; Luteinizing-Hormone Releasing Hormone; Progonadoliberin-1; Gonadoliberin I; Gonadorelin; GnRH-associated peptide 1
- Product No.CCA843Mu
- Organism SpeciesMus musculus (Mouse) Same name, Different species.
- Test MethodCompetitive Inhibition
- Assay Length2h
- Detection Range12.35-1,000pg/mL
- SensitivityThe minimum detectable dose of this kit is typically less than 5.13pg/mL.
- Sample TypeSerum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids
- Download Instruction Manual
- UOM 48T96T 96T*5 96T*10 96T*100
-
FOB
US$ 498
For more details, please contact local distributors!US$ 712
For more details, please contact local distributors! US$ 3204
For more details, please contact local distributors! US$ 6052
For more details, please contact local distributors! US$ 49840
For more details, please contact local distributors!
-
Packages (Simulation)
-
Packages (Simulation)
-
Results demonstration
-
Typical Standard Curve
-
ISO9001: 2008, ISO13485: 2003 Registered
Specificity of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
This assay has high sensitivity and excellent specificity for detection of Gonadotropin Releasing Hormone (GnRH).
No significant cross-reactivity or interference between Gonadotropin Releasing Hormone (GnRH) and analogues was observed.
Recovery of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
Matrices listed below were spiked with certain level of recombinant Gonadotropin Releasing Hormone (GnRH) and the recovery rates were calculated by comparing the measured value to the expected amount of Gonadotropin Releasing Hormone (GnRH) in samples.
| Matrix | Recovery range (%) | Average(%) |
| serum(n=5) | 86-96 | 91 |
| EDTA plasma(n=5) | 98-105 | 102 |
| heparin plasma(n=5) | 82-104 | 85 |
Precision of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Gonadotropin Releasing Hormone (GnRH) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Gonadotropin Releasing Hormone (GnRH) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%
Linearity of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Gonadotropin Releasing Hormone (GnRH) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.
| Sample | 1:2 | 1:4 | 1:8 | 1:16 |
| serum(n=5) | 96-104% | 78-91% | 88-103% | 95-105% |
| EDTA plasma(n=5) | 94-103% | 88-95% | 89-103% | 85-96% |
| heparin plasma(n=5) | 93-104% | 91-101% | 88-103% | 78-105% |
Stability of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.
Assay procedure summary of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
1. Prepare all reagents, samples and standards;
2. Add 50µL standard or sample to each well.
And then add 50µL prepared Detection Reagent A immediately.
Shake and mix. Incubate 1 hour at 37°C;
3. Aspirate and wash 3 times;
4. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
5. Aspirate and wash 5 times;
6. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
7. Read RLU value immediately.
Test principle of the CLIA Kit for Gonadotropin Releasing Hormone (GnRH)
The microplate provided in this kit has been pre-coated with a monoclonal antibody specific to Gonadotropin Releasing Hormone (GnRH). A competitive inhibition reaction is launched between biotin labeled Gonadotropin Releasing Hormone (GnRH) and unlabeled Gonadotropin Releasing Hormone (GnRH) (Standards or samples) with the pre-coated antibody specific to Gonadotropin Releasing Hormone (GnRH). After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Gonadotropin Releasing Hormone (GnRH) in the sample. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is reverse proportional to the Gonadotropin Releasing Hormone (GnRH) level in the sample or standard.