CLIA Kit for Apolipoprotein B48 (APOB48)

Apo-B48

  • CLIA Kit for Apolipoprotein B48 (APOB48) Packages (Simulation)
  • CLIA Kit for Apolipoprotein B48 (APOB48) Packages (Simulation)
  • CLIA Kit for Apolipoprotein B48 (APOB48) Results demonstration
  • SCB883Hu.jpg Typical Standard Curve
  • Certificate ISO9001: 2008, ISO13485: 2003 Registered

Specificity of the CLIA Kit for Apolipoprotein B48 (APOB48)

This assay has high sensitivity and excellent specificity for detection of Apolipoprotein B48 (APOB48).
No significant cross-reactivity or interference between Apolipoprotein B48 (APOB48) and analogues was observed.

Recovery of the CLIA Kit for Apolipoprotein B48 (APOB48)

Matrices listed below were spiked with certain level of recombinant Apolipoprotein B48 (APOB48) and the recovery rates were calculated by comparing the measured value to the expected amount of Apolipoprotein B48 (APOB48) in samples.

Matrix Recovery range (%) Average(%)
serum(n=5) 93-102 96
EDTA plasma(n=5) 91-99 95
heparin plasma(n=5) 81-91 86

Precision of the CLIA Kit for Apolipoprotein B48 (APOB48)

Intra-assay Precision (Precision within an assay): 3 samples with low, middle and high level Apolipoprotein B48 (APOB48) were tested 20 times on one plate, respectively.
Inter-assay Precision (Precision between assays): 3 samples with low, middle and high level Apolipoprotein B48 (APOB48) were tested on 3 different plates, 8 replicates in each plate.
CV(%) = SD/meanX100
Intra-Assay: CV<10%
Inter-Assay: CV<12%

Linearity of the CLIA Kit for Apolipoprotein B48 (APOB48)

The linearity of the kit was assayed by testing samples spiked with appropriate concentration of Apolipoprotein B48 (APOB48) and their serial dilutions. The results were demonstrated by the percentage of calculated concentration to the expected.

Sample 1:2 1:4 1:8 1:16
serum(n=5) 90-104% 78-91% 84-98% 86-99%
EDTA plasma(n=5) 78-103% 98-105% 86-102% 81-104%
heparin plasma(n=5) 98-105% 80-89% 82-104% 79-104%

Stability of the CLIA Kit for Apolipoprotein B48 (APOB48)

The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

Assay procedure summary of the CLIA Kit for Apolipoprotein B48 (APOB48)

1. Prepare all reagents, samples and standards;
2. Add 100µL standard or sample to each well. Incubate 1 hours at 37°C;
3. Aspirate and add 100µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
4. Aspirate and wash 3 times;
5. Add 100µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
6. Aspirate and wash 5 times;
7. Add 100µL Substrate Solution. Incubate 10 minutes at 37°C;
8. Read RLU value immediately.

Test principle of the CLIA Kit for Apolipoprotein B48 (APOB48)

The microplate provided in this kit has been pre-coated with an antibody specific to Apolipoprotein B48 (APOB48). Standards or samples are then added to the appropriate microplate wells with a biotin-conjugated antibody specific to Apolipoprotein B48 (APOB48). Next, Avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. Then the mixture of substrate A and B is added to generate glow light emission kinetics. Upon plate development, the intensity of the emitted light is proportional to the Apolipoprotein B48 (APOB48) level in the sample or standard.;

Related products

Catalog No. Organism species: Homo sapiens (Human) Applications (RESEARCH USE ONLY!)
RPB883Hu01 Recombinant Apolipoprotein B48 (APOB48) Positive Control; Immunogen; SDS-PAGE; WB.
RPB883Hu02 Recombinant Apolipoprotein B48 (APOB48) Positive Control; Immunogen; SDS-PAGE; WB.
PAB883Hu01 Polyclonal Antibody to Apolipoprotein B48 (APOB48) WB; IHC; ICC; IP.
MAB883Hu21 Monoclonal Antibody to Apolipoprotein B48 (APOB48) WB; IHC; ICC; IP.
SEB883Hu ELISA Kit for Apolipoprotein B48 (APOB48) Enzyme-linked immunosorbent assay for Antigen Detection.
HEB883Hu High Sensitive ELISA Kit for Apolipoprotein B48 (APOB48) Enzyme-linked immunosorbent assay for Antigen Detection.
SCB883Hu CLIA Kit for Apolipoprotein B48 (APOB48) Chemiluminescent immunoassay for Antigen Detection.
LMB883Hu Multiplex Assay Kit for Apolipoprotein B48 (APOB48) ,etc. by FLIA (Flow Luminescence Immunoassay) FLIA Kit for Antigen Detection.
GUESTBOOK